4dhcpmingchen
12-station disc assembling machine

Performance specification

Special requirements for mechanical and electronic aspects of equipment

S/NContent
1This machine adopts human-machine interface control, which is easy to operate and has a clear view of information
2The element is combined with the rubber cover, fixed with the rubber cover, and pulled with the CP line, which can prevent the pin contact from being damaged and causing poor contact
3The sealing turntable adopts a splitter mechanism to seal the waist, and the sealing consistency
4After sealing, a waist size and convex bean inspection mechanism is set up and classified to ensure the quality of good products
5Advanced CCD visual inspection technology is used for waist and convex bean detection
6The feed of the raw material is equipped with an integral whole leg mechanism
7The paper pad function in the aluminum shell belongs to the optional mechanism

Mechanical specifications

ItemDescriptionItemDescription
Machine name12-position disc assembly machineUse powerAC220/380V 50/60HZ
Machine modelJY-120Machine colorLight green
Scope of application φ Machine size (L * W * H, mm)1627 * 1285 * 1745
Machine floor area (m2)2.1Machine weight (kg)420
total power of the machine (KW)3gas consumption of the machine (kgf/cm ²)5~6

Equipment function parameters

ItemDescriptionItemDescription
transfer positioning error± 0.05mmprime sub-lead clearance≤ D
Machine speed50-80 pcs/minEquipment turnover rate>95%
length of conductive strip1500r/minlead lead guide position error± 0.3mm
Copyright @ 2022 Dongguan Juye Machinery Co., Ltd. All rights reserved