| S/N | Content |
| 1 | The machine panel is made of 28.5mm thick A3 material, which can increase the stability of the machine at high speed |
| 2 | The swing arm is made of cast iron, which can reduce vibration, noise, deformation and improve service life |
| 3 | The machine is equipped with a mechanical height limiting device to ensure better product height consistency |
| 4 | The machine has the capacity test function before M molding, and the defective products can be eliminated automatically |
| 5 | The bending forming part adopts the three-time mold bending forming method and the one-time product M-type setting function to ensure that the produced product does not damage the guide needle and has good stability |
| 6 | The machine has a rubber tube polarity detection and reverse polarity removal device, which can effectively prevent reverse polarity products |
| 7 | The machine motor is a variable frequency motor, and the speed can be adjusted according to the product specifications |
| 8 | The machine adopts two-color LED warning lights (red and green) |
| 9 | The machine has an air filter before air intake. If it fails to reach the set air pressure, it will stop and alarm and display it on the human-machine interface |
